Lubricating and cleaning cylinder lock
How often should you lubricate and clean a cylinder lock?
For smooth operation and sustainable cylinder lock is it wise to replace the cylinder about twice a year Lubricate with a suitable lubricant. Regular maintenance prevents wear, ensures smooth key rotation, and reduces the risk of pin seizure. The easiest way to maintain your cylinders is with our service penThis pen has been specially developed for M&C Cylinder locks are easy to dose, and one pin is more than sufficient for several years of maintenance. What should you not use when lubricating?
Tip: Lubricate the cylinder immediately after installation with the service pen – this extends the lifespan and keeps the lock working smoothly from day one.
Use no WD40, graphite powder or regular oil to lubricate your cylinders. These products seem to work in the short term, but they leave a sticky film that dust and dirt stick to. The pins inside the cylinder lock become contaminated and the lock becomes increasingly difficult to operate or even defective. Have you already used WD40 or another incorrect lubricant? Then remove the cylinder from the door and clean it carefully with brake cleaner. Make sure all parts are clean and dry before reassembling. Then re-lubricate the cylinder with the
service pen, so that the lock runs smoothly again and is protected against wear.
Lubricating a cylinder lock: here's how
Once the cylinder is clean and reassembled, you can lubricate it with the service penThanks to the precise dosing, you apply exactly enough lubricant without leaving excess oil in the lock. In the video below, we show you step-by-step how to lubricate a cylinder lock, so that your M&C cylinder continues to rotate smoothly and remains optimally secured.
Want to lubricate your cylinders directly?
Order our service pen for years of safe and smooth maintenance of your M&C cylinder locks.