M&C narrow door hardware
- Original M&C — official dealer
- Ordered before 23:59 PM = delivered tomorrow
- Always free shipping · 30-day returns
Specifications
| Length | 258 mm |
|---|---|
| Width | 37 mm |
| PC size | PC92 |
| Screw spacing | top–middle 100 mm · middle–bottom 115 mm |
| Material | Solid metal |
| Finish | Black |
| Door thickness | 38--58mm |
| Certification | SKG*** / EN1906 |
Note: especially check the screw spacing with your current door — this prevents the hardware from not fitting the existing holes.
M&C Narrow door hardware knob/handle black
Narrow door fitting of M&C with the SKG*** quality mark, intended for doors with a narrow profile — for example, uPVC, aluminium, or wooden doors with a narrow stile. Finish in the colour Black.
This attachment has no core pull protectionIf you do want that protection, then look at the narrow core pull fitting.
- SKG*** approved
- PC size 92 mm
- Knob/handle: a fixed knob on the outside and a handle on the inside. The knob does not turn, meaning the door can only be opened from the outside with the key.
- Colour Black
- Article number: S100692ZW
Unsure about the PC size? Measure from the center of the door handle to the center of the cylinder. This hardware is for PC92. If you get 55 or 72 mm, check the other door hardware.
On this narrow fitting, the through-bolts (which go straight through the door) are located on a fixed distance — this one is not adjustableTherefore, first measure your current hardware or door:
- Top bolt → cylinder: 100 mm
- Cylinder → lower bolt: 115 mm
- Top to bottom bout (center to center): 215 mm
Do your measurements not match? Then please get in touch — we will find the right fittings together, which saves a return.
Dimensions & Specifications
| Screw spacing (through, fixed) | 100 115 + mm (215 mm total) |
| PC size | 92 mm |
| Shield (h × b) | 258 × 37 mm |
| Cylinder opening | Ø 17,5 mm — Euro profile cylinder |
| Suitable for door thickness | 38 - 58 mm |
| Stool length | 130 mm |
| Certification | SKG*** · EN 1906 |
| Corrosion resistance | 240-hour salt spray test |