M&C Core pull fitting knob/handle black

The adjustable core pull fitting in the color F9 with knob/handle black is, just like the door cylinders from M&C, one of the best-selling products.

The biggest advantage of this new series is that the screw holes used to secure the hardware are adjustable. This eliminates the need to drill and ream out additional holes to replace existing hardware with core pull hardware certified by SKG 3*.

This core pulling fitting is secured against core pulling.

• M&C core pull fittings with the SKG 3* quality mark are available as standard in sizes PC55 and PC72.
• Standard suitable for doors with a thickness of 38-58 mm.
• Can be used for both right and left turning doors.
• Available in the colours stainless steel look and .

Dimensions M&C core pulling fitting:

• Thickness outer shield 12mm
• Inner shield thickness 8 mm
• Outer shield dimensions: 265x51x12 mm
• Inner shield: 265x51x8,0 mm
• The door cylinder may protrude a minimum of 10 mm and a maximum of 18 mm beyond the door.
• Distance mounting bolts are adjustable between 202 and 215mm
• core pulling fitting adjustable on the inside with screws
• Can be used for both right and left turning doors.

Below, you can select the correct PC size. Measure from the center of the door handle to the center of the lock/cylinder. The number of millimeters of this measurement is the PC size. In almost all cases, this is 55 mm, 72 mm, or 92 mm.