M&C fittings with protection
- Original M&C — official dealer
- Ordered before 23:59 PM = delivered tomorrow
- Always free shipping · 30-day returns
Specifications
| Length | 265 mm |
|---|---|
| Width | 51 mm |
| PC size | PC55 · PC72 |
| Screw spacing | Adjustable (202–215 mm) |
| Material | Aluminium |
| Finish | Stainless steel look (F9) |
| Door thickness | 38--58mm |
| Certification | SKG*** / EN1906 |
Note: especially check the screw spacing with your current door — this prevents the hardware from not fitting the existing holes.
M&C Door hardware with protective plate handle/handle
The adjustable door fitting with protective plate in the colour F9 with handle/crank is, just like the door cylinders from M&C, one of the best-selling products.
The biggest advantage of this new series is that the screw holes used to secure the hardware are adjustable. This eliminates the need to drill and re-drill additional holes to replace existing hardware with door hardware featuring a protective plate and SKG 3* certification.
- M&C door fittings with a protective plate bearing the SKG 3* quality mark are available as standard in sizes PC55 and PC72.
- Standard suitable for doors with a thickness of 38-58 mm.
- Can be used for both right and left turning doors.
- Available in the colours stainless steel look and .
Dimensions M&C door fitting with protective plate:
- Thickness outer shield 12mm
- Inner shield thickness 8 mm
- Outer shield dimensions: 265x51x12 mm
- Inner shield: 265x51x8,0 mm
- The door cylinder may protrude a minimum of 10 mm and a maximum of 18 mm beyond the door.
- Distance mounting bolts are adjustable between 202 and 215mm
- door fitting with protective plate on the inside, adjustable with screws
- Can be used for both right and left turning doors.
Below, you can select the correct PC size. Measure from the center of the door handle to the center of the lock/cylinder. The number of millimeters of this measurement is the PC size. In almost all cases, this is 55 mm, 72 mm, or 92 mm.