M&C door hardware
- Original M&C — official dealer
- Ordered before 23:59 PM = delivered tomorrow
- Always free shipping · 30-day returns
Specifications
| Length | 265 mm |
|---|---|
| Width | 51 mm |
| PC size | PC55 · PC72 |
| Screw spacing | Adjustable (202–215 mm) |
| Material | Aluminium |
| Finish | Black |
| Door thickness | 38--58mm |
| Certification | SKG*** / EN1906 |
Note: especially check the screw spacing with your current door — this prevents the hardware from not fitting the existing holes.
M&C Door Hardware Knob/Handle Black
The adjustable door fitting is in black with a black knob/handle and is, just like the M&C door cylinders, one of the best-selling products.
The biggest advantage of this new series is that the screw holes used to secure the hardware are adjustable. This eliminates the need to drill and re-drill additional holes to replace existing hardware with SKG 3*-certified door hardware.
This door fitting is not protected against core pulling.
- M&C core pull fittings with the SKG 3* quality mark are available as standard in sizes PC55 and PC72.
- Standard suitable for doors with a thickness of 38-58 mm.
- Can be used for both right and left turning doors.
- Available in stainless steel look and black.
Dimensions M&C door fittings:
- Thickness outer shield 12mm
- Inner shield thickness 8 mm
- Outer shield dimensions: 265x51x12 mm
- Inner shield: 265x51x8,0 mm
- The door cylinder may protrude a minimum of 10 mm and a maximum of 18 mm beyond the door.
- Distance mounting bolts are adjustable between 202 and 215mm
- core pulling fitting adjustable on the inside with screws
- Can be used for both right and left turning doors.
Below, you can select the correct PC size. Measure from the center of the door handle to the center of the lock/cylinder. The number of millimeters of this measurement is the PC size. In almost all cases, this is 55 mm, 72 mm, or 92 mm.